As an Amazon Associate, we earn from qualifying purchases.
The best Apple Pencil charger is the Iootmoy Charging Stand, because it holds a first-generation Apple Pencil upright while it charges, shows a light-emitting diode indicator while power flows, and keeps spare tips and the cap in one place on a desk. For a second-generation Apple Pencil, the MOGOOD Magnetic Pencil Charger is the simplest pick, because it clips on magnetically and charges through a USB-C cable without tying up the iPad. If you pair a first-generation Pencil with a newer USB-C iPad, the Apple USB-C to Apple Pencil Adapter is the official bridge that handles both charging and pairing.
Table of Contents
- How to Choose an Apple Pencil Charger
- 1. Iootmoy Charging Stand
- 2. MOGOOD Magnetic Pencil Charger
- 3. TechMatte USB-C Pencil Adapter
- 4. ONGAHON Apple Pencil Charging Adapter Cable
- 5. Apple USB-C to Apple Pencil Adapter
- Apple Pencil Charger Comparison
- Frequently Asked Questions
- Conclusion
- Product and ASIN Reference
How to Choose an Apple Pencil Charger
Start with the Pencil model in your hand, because every charger in this roundup serves a different generation. The first-generation Apple Pencil charges through a Lightning connector hidden under its cap, so it needs a stand, a cable adapter, or a USB-C bridge. The second-generation Apple Pencil charges magnetically on the side of a compatible iPad, so a magnetic cable is the useful add-on when the iPad is busy or out of reach. The Apple Pencil with USB-C charges through a USB-C cable, so a plain USB-C cable and power adapter already cover it, and a dedicated dock is rarely needed.
Next, decide where charging will happen. A desktop stand suits a fixed drawing desk, because the Pencil stays upright, visible, and ready between sessions. A short cable adapter suits a bag or a travel kit, because it weighs almost nothing and works with any USB port. A two-pack adapter suits a household with more than one Pencil or a spare kept at the office.
Check the connector on the other end before you buy. Some adapters end in USB-C, which matches current iPad charging cables, while others end in USB-A, which matches older wall chargers, laptops, and power banks. A mismatch here means an extra cable or a dongle, so match the adapter to the cable you already own.
Look at the extras that keep small parts from getting lost. Stands with a cap holder and a tip holder solve the two most common annoyances of first-generation Pencil ownership, and a built-in USB port lets the same dock top up another device. Finally, weigh official against third-party: the official Apple adapter is the safe choice for pairing a first-generation Pencil with a USB-C iPad, while third-party stands and cables cover everyday charging at a lower tier.
1. Iootmoy Charging Stand
The Iootmoy Charging Stand turns first-generation Pencil charging into a tidy desk routine. Instead of plugging the Pencil into the side of an iPad and leaving it sticking out at an awkward angle, you slide it into the stand, where it rests upright and charges through a built-in connector. A light-emitting diode indicator shows charging status at a glance, so you can tell from across the room whether the Pencil is still filling up or ready to draw.
The stand also works as a small organizer. Slots hold the Pencil cap and spare tips, which removes the usual hunt for a cap that rolled behind a monitor, and a USB port lets you connect the dock to a laptop, a wall charger, or a power bank. The base sits flat and keeps the Pencil vertical, so the tip does not press against a surface while charging, and the open top makes it easy to lift the Pencil out with one hand.
Specs
- Compatibility: Apple Pencil 1st generation
- Charging style: Upright dock with built-in connector
- Indicator: LED charging indicator
- Storage: Pencil tip holder and cap holder
- Extra port: USB port
- Tier: Mid-range
2. MOGOOD Magnetic Pencil Charger
The MOGOOD Magnetic Pencil Charger solves a different problem: charging a second-generation Apple Pencil away from the iPad. The second-generation Pencil normally charges on the magnetic edge of a compatible iPad, which works well until the iPad is in use, in a case, or charging itself. This cable clips onto the Pencil magnetically and feeds it power through a USB-C connection, so the Pencil can charge from a wall charger, a laptop, or a power bank while the iPad stays free.
The magnetic connection is the key detail. It aligns itself with the charging contacts on the Pencil, so there is no plug to force and no cap to remove, and the round, flexible cord coils easily into a bag. It draws power at up to 10 watts from a 5-volt source, enough to top up the Pencil between drawing sessions. One limit matters: this charger works with the second-generation Apple Pencil only, and it does not work with the Apple Pencil Pro, so confirm the model before ordering.
Specs
- Compatibility: Apple Pencil 2nd generation only
- Charging style: Magnetic clip-on cable
- Connector: USB-C
- Power: Up to 10 watts at 5 volts
- Cable type: Round magnetic charging cord
- Tier: Budget
3. TechMatte USB-C Pencil Adapter
The TechMatte USB-C Pencil Adapter is a small bridge for a common mismatch: a first-generation Apple Pencil and a USB-C iPad. The first-generation Pencil ends in a Lightning plug, while current iPads charge through USB-C, so the two cannot connect directly. This adapter sits between them, with a USB-C male end for the iPad cable and a Lightning female end for the Pencil, and it supports both charging and Bluetooth pairing with the iPad 10th generation and the iPad 11-inch with the A16 chip.
The two-pack is the practical reason to choose this one. One adapter can live in a pencil case while the other stays on a desk, so a lost adapter does not end a drawing session, and it needs no battery or software of its own. Compatibility is narrow by design: it works with the first-generation Pencil and the two iPad models named above, and it does not work with other Pencil models or other iPads.
Specs
- Compatibility: Apple Pencil 1st generation with iPad 10th generation and iPad 11-inch (A16)
- Charging style: USB-C to Lightning adapter
- Functions: Charging and Bluetooth pairing
- Pack size: 2 adapters
- Model number: TM-001-USBCPencilAdapter
- Tier: Budget
4. ONGAHON Apple Pencil Charging Adapter Cable
The ONGAHON Apple Pencil Charging Adapter Cable is the shortest route from a dead first-generation Pencil to a working one. It is a one-foot cable with a female Lightning socket on one end for the Pencil and a USB plug on the other for any power source. Plug the Pencil into the socket, plug the cable into a laptop, a wall charger, or a power bank, and charging starts without an iPad in the loop.
The short length is a deliberate trade-off. A one-foot cable keeps the Pencil close to its power source instead of dangling from a long cord, which suits a desk or a nightstand, and the copper core carries the charge reliably. The listing describes a full charge in about 20 minutes, which matches the quick top-up behavior of the first-generation Pencil battery. Keep one in a travel kit and the Pencil never has to plug into the side of an iPad at an awkward angle again.
Specs
- Compatibility: Apple Pencil 1st generation
- Charging style: Direct adapter cable
- Cable length: 1 foot
- Core: Copper conductor
- Pack size: 1 cable
- Tier: Budget
5. Apple USB-C to Apple Pencil Adapter
The Apple USB-C to Apple Pencil Adapter is the official answer to the same Lightning-to-USB-C gap the third-party adapters address. It connects a first-generation Apple Pencil to the USB-C charging cable that came with a compatible iPad, and it handles both charging and pairing. Because it comes from Apple, it is the reference design other adapters copy, and it is the choice to make when pairing reliability matters more than saving on a spare.
Use is straightforward. Remove the cap from the first-generation Pencil, plug the Pencil into the Lightning end of the adapter, and connect the USB-C cable from the iPad to the other end. The Pencil charges from the cable and pairs with the iPad through the same connection, and the adapter works with the Apple Pencil 1st generation, the iPad A16, and the iPad 10th generation. The premium tier reflects the official badge and the pairing guarantee rather than extra features: there is no stand, no indicator light, and no spare in the box, just a compact adapter that does one job exactly as Apple describes it.
Specs
- Compatibility: Apple Pencil 1st generation, iPad (A16), iPad 10th generation
- Charging style: USB-C to Lightning adapter
- Functions: Charging and Bluetooth pairing
- Brand: Apple
- Connector: USB-C
- Tier: Premium
Apple Pencil Charger Comparison
| Product | Best For | Pencil Model | Tier |
| Iootmoy Charging Stand | Desk charging and storage | 1st generation | Mid-range |
| MOGOOD Magnetic Pencil Charger | Charging away from the iPad | 2nd generation | Budget |
| TechMatte USB-C Pencil Adapter | Spare adapters for USB-C iPads | 1st generation | Budget |
| ONGAHON Apple Pencil Charging Adapter Cable | Travel and quick top-ups | 1st generation | Budget |
| Apple USB-C to Apple Pencil Adapter | Official pairing and charging | 1st generation | Premium |
Frequently Asked Questions
How do I charge a first-generation Apple Pencil without an iPad?
Use a charging stand, an adapter cable, or a USB-C adapter with a standard USB power source. Remove the cap, connect the Pencil to the charger, and plug the charger into a wall adapter, a laptop, or a power bank. The Pencil charges from any USB power source, so the iPad does not need to be involved.
Can I charge a second-generation Apple Pencil with a cable?
Yes, with a magnetic charging cable made for the second-generation Pencil. The cable clips onto the magnetic charging contacts and draws power through USB-C. It does not work with the first-generation Pencil, the USB-C Pencil, or the Apple Pencil Pro, so confirm the model first.
Why does my first-generation Pencil need an adapter for a new iPad?
The first-generation Pencil ends in a Lightning plug, while current iPads use USB-C. A USB-C to Lightning adapter bridges the two so the Pencil can charge and pair through the iPad charging cable. Without the adapter, the Pencil cannot connect to a USB-C iPad at all.
Is the official Apple adapter better than a third-party adapter?
The official adapter is the reference design and the safest choice when pairing must work the first time. Third-party adapters cover the same charging and pairing functions for the same iPad models, and a two-pack adds a spare at a lower tier. Choose the official part for guaranteed pairing and a third-party pack for backup value.
Conclusion
The right Apple Pencil charger depends on the Pencil model and where you draw. A first-generation Pencil owner with a fixed desk gets the most from the Iootmoy Charging Stand, which charges, stores, and organizes the Pencil in one place. A second-generation Pencil owner who draws away from the iPad should carry the MOGOOD Magnetic Pencil Charger. Anyone pairing a first-generation Pencil with a USB-C iPad needs a bridge adapter, and the Apple USB-C to Apple Pencil Adapter is the official choice, with the TechMatte two-pack as a practical backup and the ONGAHON cable as the lightest travel option. Match the charger to the Pencil first, the connector second, and the desk or bag third.
Product and ASIN Reference
| Product | ASIN | Tier |
| Iootmoy Charging Stand | B09Q33FZVD | Mid-range |
| MOGOOD Magnetic Pencil Charger | B0BNVJQ569 | Budget |
| TechMatte USB-C Pencil Adapter | B0DCZQGC7F | Budget |
| ONGAHON Apple Pencil Charging Adapter Cable | B0BY1ZGZTQ | Budget |
| Apple USB-C to Apple Pencil Adapter | B0D1WWX9LB | Premium |





Write Your Review
No reviews yet. Be the first to share your experience!